KENWOOD CS-4135A 40 MHz Oscilloscope

KENWOOD CS-4135A 40 MHz Oscilloscope 150mm rectangular with internal graticule Spec: 40MHz

KENWOOD CS-4135A 40 MHz Oscilloscope

Type                  150mm rectangular with internal graticule

Accelerating voltage  Approx. 12kV

Effective area          8×10 div. (1div=10mm)

Sensitivity          1mV/div to 5V/div                         (1mV/div., 2mV/div.±5%, 5mV/div to 5V/div. ±3%)Attenuator          1-2-5 steps, 12 ranges, and fine adjustment

Frequency response

DC                  DC to 40MHz (-3dB) (5mV/div. to 5V/div.)                         DC to 5MHz (-3dB) (1mV/div. to 2mV/div.)

AC                  10Hz to 40MHz (-3dB) (5mV/div. to 5V/div.)                         10Hz to 5MHz (-3dB) (1mV/div. to 2mV/div.)

Input impedance    1MΩ ±2%, Approx. 23pF

Rise Time        Approx. 8.75ns (40MHz) (5mV/div. to 5V/div.)                        Approx. 70ns (5MHz) (1mV/div to 2mV/div.)

Crosstalk         Below -40dB (at 1kHz sine wave)

Polarity inversion CH2 only

Maximum input voltage 800V p-p or 400V (DC AC peak)

CHOP                    frequency Approx. 250kHz

Horizontal axis (CH2 input)

Operating modes          Switch to X-Y on CH1 : Y-axis / CH2 : X-axis

Sensitivity          Same as CH2 vertical axis

Input impedance          Same as CH2 vertical axis

Frequency response  DC : DC to 500kHz (-3dB)

AC :                     10Hz to 500kHz (-3dB)

X-Y phase difference  Within 3 degrees at 50kHz

Sweep

Sweep time             0.2µs/div. to 0.5s/div. ±3%                        1-2-5 steps, 20 ranges, and fine adjustment

Magnified sweep (×10MAG)               ×10, ±5%

Linearity          ±3%(×10MAG : ±5%)

Triggering

Trigger sources          VERT, CH1, CH2, LINE and EXT

External trigger

Input impedance  1MΩ, Approx. 23pF

Maximum input voltage 84V p-p or 42V (DC ACpeak)

Calibration voltage 1V p-p±3% (Square wave, 1kHz, positive polarity)

Intensity modulation

Input voltage    TTL level (dark for positive voltage)

Input impedance Approx. 5kΩ

Frequency response DC to 3.5MHz

Maximum input voltage 84V p-p or 42V (DC AC peak)

CH1 Signal output

Output voltag Approx. 50mV/div. (loaded 50Ω)

Output impedance Approx. 50Ω

Frequency response 100Hz to 20MHz

(within ±3dB, loaded 50Ω)

Trace rotation Enables trace rotation adjustment from front panel

Environmental condition 10°C to 35°C, 85% or less (temperature/humidity for characteristics in spec.)

Operation conditon 0°C to 40°C, 85% or less (temperature/humidity for operation)

Power source         100/120/220/230V AC ±10% (250V AC maximum), 50/60Hz

Power consumption 30W maximum

Case dimensions   290 (W)×150 (H)×390 (D) mm

Maximum dimensions 290 (W)×172 (H)×443 (D) mm

Weight Approx. 6.9kg

Accessories Instruction manual (1) / Probe (PC-54) (2) / Power cable (1)

KENWOOD CS-4135A 40 MHz Oscilloscope